Re: farmall c hydraulics

Posted by Harold Hubbard on May 31, 2002 at 04:20:26 from (216.114.181.231):

In Reply to: farmall c hydraulics posted by rkg on May 31, 2002 at 04:07:01:

Years ago I had a Super C with a loader. There was a block bolted between the hydraulic lines from the pump to the touch control assembly. This diverted the pressure through a control valve that ran the loader, and back to the touch control. Some one with a little understanding of hydralics could probablly design one, and it would be a pretty simple machine shop project to build. The loader also had an auxilary tank hung on the light bar, with a hose to the original fill plug on the touch control housing. This would be a good idea on any C wher the hydraulic are being used heavily,provides more volume of oil for better cooling.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: farmall c hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]