|
Farmall & IHC Tractors Discussion Board |
44 A turns over but won't catch
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joseph P. on May 28, 2002 at 15:39:41 from (206.243.130.239):
I shut my tractor down for a week, and when I shut it down it ran ok although the battery was losing some juice because my charging system isn't up to par. This afternoon I went to start it up, and it turned over but I ran the battery down and it would not catch although for the first few cranks they were strong. Where should I start? I disconnected the cap wires but reinstalled them to go to 1the correct firing order 1342. But I am not sure if the order is right. Going counterclockwise on the cap the wires are 1,2,3,4. ? Is that correct? What else? Would a weak 6V batter not send enough current to the points? I am not familiar with magnetos. What is in a magneto that serves as a coil would do? I can't get at the points yet to see if they need a slight cleaning, but I may give that a try. Your help is needed and appreciated. JP
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|