Re: Update #2: Help on loosening Exhaust Manifold Bolts!

Posted by Ron in Az on May 06, 2002 at 07:35:54 from (24.221.144.129):

In Reply to: Update #2: Help on loosening Exhaust Manifold Bolts! posted by dvtw on May 06, 2002 at 06:40:42:

Have you tried to use the vice grips down closer to the head and tighten while hitting the stud some to help it to losen up. I gather you do not have a torch, then you will be forced to drill it out but you have to be real carefull it has to be a really straight drill hole. And for a little hummor if you turn the tractor on its side so that the PB Blaster could soke in it could help or it would be a differnt view of things. LOL

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Update #2: Help on loosening Exhaust Manifold Bolts! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]