Re: B Govenor

Posted by ScottyNY on April 26, 2002 at 19:35:56 from (128.59.6.46):

In Reply to: B Govenor posted by Joel Cizek on April 26, 2002 at 19:10:35:

Joel, if the linkage seems otherwise alright, there is an adjustment to thte governor meant to deal with surge. On the underside of the governor housing, you'll find an acorn nut. Remove it an underneath you'll find a threaded stud with a slot head cut in it. With the tractor *NOT* running, thread this screw in by half turns, restarting to check, stopping to adjust. When you begin to see results start going by quarter turns. If the first half turn takes care of it, try backing off a quarter. If it's in too far, it can affect your low idle. When the surge is gone, just thread the acorn nut back on. Hope this does it for you.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: B Govenor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]