|
Farmall & IHC Tractors Discussion Board |
Re: 460 diesel pump
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Honkey on April 22, 2002 at 11:31:40 from (64.68.163.26):
In Reply to: 460 diesel pump posted by Keith on April 21, 2002 at 19:01:45:
Hi Keith,
If you take the pump apart completely it will have to be put on the stand and recalibrated at an injection shop. If the head is bad you would be ahead to exchange your pump for a rebuilt pump. How did it start? How many hours are on it? The rubber ring behind the governor weights and the metering valve usually the main two things to replace on a rebuild. If it started well enough I would rebuild the pump you have. If not I would exchange it for a rebuilt, not to mention it would be much quicker. Those places can get very busy! Most shops won't put warranty on a pump exchange unless you exchange your injectors as well. Don't take long to get to $1500. Matthew in SD
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
