F14 Question

Posted by Tim on April 01, 2002 at 17:16:49 from (67.194.61.231):

I'm getting ready to reassemble the new head on my F14. In sorting through my parts I'm baffled by the 8 washers you see in the photo circled in red. I took this apart over a year and a half ago and can't determine where they came from. I thought at first they might be a spacer on the rocker arm shaft but they are a fraction too small to fit over it. They must have come from the head somewhere as they were in the box with the valves and rocker arms. Only other possibility I can come up with is they went under the valve springs next to the head. Problem is, I have two other old heads and neither have washers there. The washers are about .725" ID and 1.210" OD. Anybody have any other ideas?
Thanks
Tim

• F14 Project

Follow Ups:

• Re: F14 Question TNR 18:11:10 04/01/02 (0)
• Re: F14 Question jmandt 17:25:13 04/01/02 (0)

Post A Followup Name: E-Mail: Subject: Re: F14 Question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]