Re: Stuck pistons

Posted by Will-in Texas on April 01, 2002 at 10:48:17 from (63.172.141.127):

In Reply to: Stuck pistons posted by 54SMTA on March 31, 2002 at 20:45:02:

Have two Farmall Bs that were stuck. Used PB Blaster, S'Ok, you name it, we tried it. And they were not successful.
Finally, after pouring Marvel Mystery oil into the first one's cylinders, I ended up pounding them out with a hickory hammer handle and a BRASS hammer. We used the brass hammer on two pistons. No. 4 on one and No. 2 on the other. They were frozen tight, but a few blows with a little sledge and boom, out.
Fixing to try that theory out on an H and then on the grand prize, a 1939 M.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Stuck pistons Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]