Re: How many chisel shanks will M pull?

Posted by The Dukester on March 27, 2002 at 16:57:43 from (65.89.18.220):

In Reply to: How many chisel shanks will M pull? posted by R Wyler on March 26, 2002 at 17:14:18:

When chisel plows were replacing moldboards-bigtime-the rule used to be 11 to 14 drawbar horses required for each twisted 4 inch shovel/shank to pull at a decent speed in average soils at 8 inch depth. This came from a Krause rep I believe.

Follow Ups:

• Re: Re: How many chisel shanks will M pull? R Wyler 18:40:38 03/27/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: How many chisel shanks will M pull? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]