|
Farmall & IHC Tractors Discussion Board |
Re: disc brakes on a Farmall M
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on March 27, 2002 at 10:13:07 from (129.37.117.233):
In Reply to: disc brakes on a Farmall M posted by alaskapete on March 27, 2002 at 08:02:27:
From the beginning of production, disk brakes were available as an option. The brakes were made by Lambert Company and are similar, but different than the disk brakes on the Super and later series. The Lambert brakes have three bolts holding the housing to the transmission case. I believe the brakes on the Super Series use 6 bolts. I have an MD with the Lambert brakes. I saw an M sell at auction last fall that had them. It sold at a small premium because it had the disk brakes. At least the quy that bought it told me that he would not have paid that for it except it had those brakes. It was rough, and as I recall it brought $1500. I've also seen a few on the internet for sale that have these brakes. I needed a part for one of mine, and finally found it from a salvage yard, but it was not easy to find. You can still buy the disks from IH. The disks on the Super series don't fit, the splines are different. Sorry this got so long, and I have no idea how many H and M tractors had these brakes, just that there are not many. One Salvage dealer near me had not even heard of them.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
WANTED Front grille/nose assembly for Massey Ferguson 1160 (also fits 1180 & 1190). Headlight-mount section. AGCO Grille 3706022M91 (supersedes 3705942M91), cover 3705494M1/M2, holders 3705501M91/3711158M92. New/NOS/good used OK. Jonesboro, AR - will pay shipping. Photo appreciated. Thanks
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
