Re: Farmall H with a 3 pt a Loader?

Posted by Haas on March 22, 2002 at 16:52:24 from (129.37.117.137):

In Reply to: Farmall H with a 3 pt a Loader? posted by Jim on March 22, 2002 at 16:20:28:

You just need to put a valve in the line to change the flow to your 3 pt when you want to use it. If you have any leaks in your loader, hydraulics, you'll have to have a way to manually lock the loader in carry position. Not sure how the loader set up works, but what you could do is put valves on all the outlets from the lift all, using one of the outlets for the 3 pt. and the other two for the loader. When you want to use the 3 pt, just shut off the valves to the loader and when you are using the loader, shut off the valves to the 3 pt.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H with a 3 pt a Loader? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]