Need Woods mower hardware for a Farmall 100

Posted by Paul Taylor on March 20, 2002 at 17:12:40 from (63.27.119.157):

My Farmall 100 came to me with a 42" Woods belly mower (which I wish was a bit larger) and a "drawbar" bolted to the tractor that seems to be the incorrect one. I am missing the pulleys and belt. All I have is the deck and the drawbar. Can anyone help me with some pictures or diagrams, in case I end up building my own assemblies?
I know the parts are available from Woods, but the cost is prohibitive.
Is the drawbar assembly with the pulleys the same on a Cub?
Is there a source for these parts used?
Would my 100 mow ok with a 5 foot mower?
I'm in northeast Texas.

Thanks,
Paul Taylor

Follow Ups:

• Re: Need Woods mower hardware for a Farmall 100 Haas 19:04:34 03/20/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Need Woods mower hardware for a Farmall 100 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]