Re: 4th gear on a 666

Posted by the tractor vet on March 16, 2002 at 08:15:47 from (216.196.13.250):

In Reply to: 4th gear on a 666 posted by PART-TIME FARMER on March 15, 2002 at 19:54:46:

There are several things that could be causeing it , (1) it is not going all the way in , (2) the gear is woren because that is the gear that was used the most and at on point it was ground off to much , (3) the shifting fork is wore and not allowing it to go all the way in and holding it in place. (4) the ft. bearing on the pinion that goes into the input shaft is bad and causeing it to move up and down . Anyway ya look at it ya got some wrenchen to do , if ya don't fix it and something dropes to the bottom of the case then you will bust the case and somemore gears on the bottom shaft.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 4th gear on a 666 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]