Farmall & IHC Tractors Discussion Board |
Re: Message for Boog - SMTA Power Steering
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by boog on March 15, 2002 at 11:22:37 from (66.73.130.38):
In Reply to: Message for Boog - SMTA Power Steering posted by Tom on March 14, 2002 at 17:18:47:
Tom, Neighbor has an M with Charlyn p.s. with same setup as you described. The Behlen used a cam driven pump which was mounted in front of the distributer. Charlyn motor set under the hood whereas Behlen mounted in from of steering column. I decided to go with Behlen because the Super M we had as I was growing up had the Behlen. I'm beginning to whish I had went with the Charlyn instead. Everything is pointing to using a priority valve as Farmalldan advised. For the life of me I can't remeber our old SM having one. Nor do any of the old pictures show one. As many times as I helped put on the 448 cultivator and cornpicker I just can't recall seeing all the hoses one requires. Oh well, live and learn. Thanks for posting back and LOL boog
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|