Wire loom sizes

Posted by ScottyNY on March 12, 2002 at 15:54:52 from (128.59.42.31):

Lining up, scouting out parts, etc. for restoring the BN. I've found a source for the original style wire loom. Problem is, available quanities are far more than I'll need and not especially cheap even in quantity. I'll have plenty to share when I'm done. Sizes start at 3/16 I.D., and go by 16ths to 3/8, then 1/2 and 5/8. Will spend what I need to get it right, but am hoping someone can share experience on correct/ sizes for one and two pieces of 10 or 12ga, and 0 for the battery and ground cables. Thanks for any help! Scotty

Follow Ups:

• Re: Wire loom sizes Kirk in PA 08:45:03 03/13/02 (0)
• Re: Wire loom sizes Farmer Bob 18:28:01 03/12/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Wire loom sizes Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]