Re: C Touch Control

Posted by Harold Hubbard on February 26, 2002 at 05:11:41 from (216.114.162.166):

In Reply to: C Touch Control posted by Charles Norwood on February 25, 2002 at 20:01:28:

A good solution to this problem is a small hydraulic tank mounted to the light bar, and connected to the filler port by a hose. I had a setup like this on a Super C with a loader. It is probably a good idea on any touch control that is being used with an auxiliary cylinder, as it give a little more oil capacity for cooling, and allows the use of a breather to prevent pressure build up in the reservoir. An added benefit is not wearing a cupful of hot hydraulic oil when you remove the filler plug to check the oil, with the tractor hot and the brain at idle.

Follow Ups:

• Re: Re: C Touch Control Charles Norwood 05:43:57 02/26/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: C Touch Control Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]