Farmall M frame rails, and paint questions

Posted by Kenny Christopherson on February 10, 2002 at 10:29:41 from (205.188.199.159):

Does anyone know if you can take the frame rails off to paint inside them, and leave the engine all connected to the rear end? I am asking for restoration puroses obviously :-). I am not going to pull the engine in this one, because it has seen a lot less than average use, I was just wondering if I can take the frame rails off without pulling the engine. I know would have to take the front pedestal off. That isn't a problem. Also, I was thinking on using PPG paint on this restoration. What all will I need for the paint- amount of paint to do the tractor, hardener, thinner, air compressor, paint gun, and primer???? Thanks guys. Any other info is appreciated. Thanks again!

Follow Ups:

• Re: Farmall M frame rails, and paint questions BJ 12:00:47 02/10/02 (0)
• Re: Farmall M frame rails, and paint questions Jon 10:32:28 02/10/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Farmall M frame rails, and paint questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]