Re: Re: Re: Farmall M is dieseling

Posted by Tony460 on January 26, 2002 at 16:58:33 from (64.24.84.18):

In Reply to: Re: Re: Farmall M is dieseling posted by Dave_Id on January 26, 2002 at 16:45:55:

Not to jump in the middle of what someone is talking to you about, but with a one wire alt. you should not need a transistor. None of my tractors have them.

Your positive post on the Alt. should be hooked directly to 12 volts of current ALL the time. Your m should not diesel with a one wire alt.

Now, It will run after ignition switch is turned off if alt is wired to cold side. Remove wire and install on other side of switch, which will be 12 volts constant.

Questions I'll e-mail a schematic

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Farmall M is dieseling Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]