Governor Repair Request

Posted by Bob T. (Farmall Rookie--- on June 18, 2007 at 03:39:43 from (24.91.165.8):

In Reply to: H Governor?????? posted by cordell huebsch on August 29, 2004 at 17:39:27:

Would someone who has a scanner is familiar with Governor
"Trouble Shooting" put up on this bulletin board a complete
hand drawn diagram of the Farmall H Governor design with
component parts and its interface with the carburator indicating
the places where things go wrong and the remedies tagged to
these trouble spots where metal wears.

Perhaps YT Company might do this as a service to parts buyers.
One has to read through all the "Governor" postings to get a
sense of the difficulty controlling the "Idle Speed" to remedy the
"Hunting for the Right Speed" on the Farmall H and even then it
is not an easy repair that is for sure. Lastly, must the governor
shaft be hand machined as they are not available?

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]