Re: Super C Leaking from Manifold

Posted by J.J. from Afton on June 16, 2007 at 15:31:46 from (71.215.250.5):

In Reply to: Super C Leaking from Manifold posted by Charles TX on June 16, 2007 at 14:59:52:

There should not be anything wrong with it all. If I am correct it is the same concept as the F-12 where the bolts/studs that hold the manifold thread into a the wall of the water passage on the head. So when you remove the manifold you need to drain the antifreeze and remove all the bolts. Than you have to put thread sealent on the studs/bolts before putting them back into the head to prevent future leaks.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]