Re: Farmall Super H Propane Carb

Posted by Owen Aaland on June 11, 2007 at 18:23:06 from (198.70.47.162):

In Reply to: Farmall Super H Propane Carb posted by 3mr on June 11, 2007 at 16:44:09:

The problem is in the convertor/regulator. There should be no fuel getting by the regulator until vacuum is applied to the outlet to the mixer. Depending on what system is installed it should, take either 1/2 inch or 1 1/2 inch of negative water pressure to start to open the regulator. this is a very tiny amount. It is the amount of vacuum you would apply to suck water up soda straw that much.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]