Re: Hydraulic Filling on 560

Posted by Lance Ropte on June 03, 2007 at 19:09:43 from (65.166.133.88):

In Reply to: Hydraulic Filling on 560 posted by Ronald R. Prinzing on June 03, 2007 at 17:44:48:

The fill hole is the on top of the transmission deck just to the right of the gear shift. Remove the three bolts on that plate and add the fluid through that hole. The 560 takes 15 gallans. There's a plug on the left side of the transmission housing on the right side just below and in front of the cluch pedel to check for proper fuid level. If you drain the fluid, there are three different plugs to drain from but I'd make sure I only did one plug at a time and replaced that plug before I went to the next plug or it will come out so fast that you will make a mess. I speak from experience on that one.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]