Re: super m 12 v

Posted by Gary in Mozarks on May 26, 2007 at 18:52:57 from (66.43.47.75):

In Reply to: super m 12 v posted by Jack Rose on May 26, 2007 at 18:43:30:

Check the voltage comming off the resistor. It should be 6 to 8 volts. The only reason for a coil to get escessively hot is to much voltage, so unless the coil is failing, the resistor is probably the problem. I don;t quite understand all the interest in changing coils at conversion. All relevant coils are 6 volt. they either have a internal resistor or external. If you already have a good 6 volt coil, a ceramic resistor is alot cheaper than a coil. Some systems will run 12 volts to the coil in the crank mode only and revert to 6 volts at RUN to make them start easier in the winter.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]