Re: 1066 Remote Hyd Lever hard to disengage

Posted by Owen Aaland on May 25, 2007 at 12:38:06 from (198.70.47.162):

In Reply to: 1066 Remote Hyd Lever hard to disengage posted by Michael Sheik on May 25, 2007 at 11:55:23:

The adjustment for the detent on the auxiliary valve is inside the back of the valve. The back of the valves have a round pipe sticking out with a plug on the end. In the center of the plug there should be a dust cap covering a hole in the center. If this is missing you may have dirt inside the detent causing it to work harder. You can try flushing it out with light oil. If that makes no difference, use a screwdriver and loosen the adjustment screw inside the hole about a quarter turn or enough to get the valve to work easier. If it gets too loose to stay in detent while using a cylinder just tighten it a little.

Replies:

• Re: 1066 Remote Hyd Lever hard to disengage Michael Sheik 12:48:18 05/25/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]