Re: Still no start

Posted by turbos10 on May 19, 2007 at 22:02:42 from (71.48.172.104):

In Reply to: Still no start posted by CNKS on May 19, 2007 at 18:26:25:

Any machine shop should be able to true up that manifold on a mill, so it is not a total loss.

Have you checked to be sure the firing order is not backwards? Just a thought if distributor rotation is backwards from what you thought.

I would think even with a vaccum leak, you could get some kind of responce.

Replies:

• Re: Still no start CNKS 05:57:38 05/20/07 (1)
  • Re: Still no start El Toro 06:37:01 05/20/07 (0)
• Re: Still no start CNKS 05:52:41 05/20/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]