Re: Still no start

Posted by CNKS on May 19, 2007 at 20:47:04 from (204.249.178.32):

In Reply to: Still no start posted by CNKS on May 19, 2007 at 18:26:25:

Carburetor is adjusted to specs, nothing to that part of it. But, my worst suspicions are confirmed. Chinese intake manifold does not fit against the head properly. Used a light and mirror to look at underside. About a 1 inch long, 1/16 inch thick gap between head and manifold gasket. Probably enough to mess up the mixture, possibly cause it not to get into the engine at all. I might be able to wiggle it around enough to start the engine, I doubt it. Only correct answer is a new manifold. I am moving in a couple of months and have to get my house ready for sale. All I need to do at this time is be able to get the tractor on a trailer to move it. Might be able to find a winch somewhere. Far as doing any more work on the tractor, I am out of time. Thanks very much for all your help.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]