Farmall & IHC Tractors Discussion Board |
Re: Batttery Cable Hookup
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob M on May 14, 2007 at 12:47:31 from (151.190.254.108):
In Reply to: Re: Batttery Cable Hookup posted by John T on May 14, 2007 at 12:10:46:
I gotta agree with you John T - that's it how was taught to me too. "Skin effect" is an frequency-dependent AC phenomenom. For DC and low frequency (eg. 60Hz) AC currents, the only thing matters is cross sectional area of the conductor. Skin effect simply is a non-factor for DC and low freq AC. Ie. a #1/0 1045 strand copper welding cable, #1/0 273 strand locomotive cable, #1/0, 133 strand automotive battery cable, #1/0 19 strand aerial cable and a 0.083" square inch solid copper bus bar all exhibit exactly the same DC resistance per unit length. The only reason for different strand diameters/numbers of strands is to provide the degree of mechanical flexibility required for a particular application. However for AC currents at RF frequencies all I know is skin effect and conductor surface area become VERY critical. (Beyond that RF is a field which I don't begin to comprehend!)
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|