C casting and engine serial #

Posted by karl f on May 06, 2007 at 22:54:15 from (172.131.56.69):

lookin at our junked c today, has R and S castings on majority of tractor. that would place it in early production--serial tag is missing. engine was replaced at least once before. the engine serial number starts FCM. has a casting date of O on the block on the distributor side (did not look closely at any other engine casting # as that block is junk). what might this have been off of? i assume FCM would equal farmall c.

noticed an interesting casting just below the platform date code on the edge of the platform near the clutch: "L No. 1" is this anything special or did this occur often?

also there is an MF cast into the touch control lift body. massey have something to do with those hydraulics?

been pretty bored lately had lots of free time today

-karl f

Replies:

• Re: C casting and engine serial # gene bender 02:32:43 05/07/07 (1)
  • Re: C casting and engine serial # karl f 16:13:27 05/07/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]