Re: Small hose for ether injection system.

Posted by Wardner on May 04, 2007 at 01:33:13 from (4.154.240.110):

In Reply to: Small hose for ether injection system. posted by Bradford on May 03, 2007 at 18:35:23:

I think it is the same tubing used for oil pressure guages. It can be had in either copper or plastic. If it is not available at an auto parts store, try a good hardware store or a plumbing supply house.

You will need the manual or electric valve anyway. The tubing should be in the kit.

A salvage yard that has big trucks should have everything you need. Portable air compressors, gensets, and most large equipment should also be a good source.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]