|
Farmall & IHC Tractors Discussion Board |
H charging update
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob Kerr on April 25, 2007 at 19:29:26 from (64.12.117.8):
It Works!!!! Thanks guys for all the help. Here is the list of problems encountered on my H, First off, someone hooked up a 12v batt neg ground, the regulator was shot, the coil was wired backwards, the gen was wired backwards, two wires were backwards in the switch housing. the auto parts store impropery tested it and passed it, The new regulator came from car quest, but was a NAPA regulator (someone pulled a fastone down the line and returned a freshly toasted one), the genny was retested by a guy at the parts store who acually new how to use the machine and it failed test, the genny was taken to a starter shop retested with the regulator and failed and it was found to have the two posts wired backwards inside the genny. Also had to get another regulator. Whew! This thing bout had me nuts and cash was flying out of my wallet like bats from a cave. She puts out about 13-15 amps now at full throttle. I wonder if someone tried to make it negative ground since everything was backwards. Now that it is running I notice it has a noisy rearend...bad bearing pieces of the cage came out with the gear oil change and I have to get the rain cap from chattering, It looks like the engine may have been rebuilt, I just hope the same guy who did the wiring didn't do the engine!!
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|