Re: Electrolysis Success

Posted by the Unforgiven on April 20, 2007 at 16:33:39 from (66.146.249.116):

In Reply to: Re: Electrolysis Success posted by BF8690 on April 20, 2007 at 12:21:53:

It will eat your sacrificial anode fairly rapidly, quickly if it is too small. That is why scrap sheet works pretty nice. Right now I am using up some F20 hoods that were smashed beyond repair. It seems like carbon? rods are the hot set-up, they they don't erode and the crud coming off your part doesn't stick to them like it does with steel. As for the brass, it will not damage it but will discoler it some. Any of the babbit I have done was damaged before I cleaned it, but I did not notice any erosion due to the process.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]