Re: Please Back Away From the Toolkit

Posted by Bf8690 on April 20, 2007 at 12:16:54 from (138.163.0.43):

In Reply to: Please Back Away From the Toolkit posted by A. Bohemian on April 20, 2007 at 11:55:16:

You're probably right that it morethan likely isn't the governor. However, the governor linkage directly controls the operation of the carb butterfly. When I got my M I didn't know if any of the adjustments were correct. After I rebuilt the motor and restored the tractor it wouldn't run right. I varified that everything was tight and that weren't any leaks. So I adjusted my governor, per the manual, and it purred like a kitten. It was however surging a little, which is what led me to the governor, as you explained. Then I did the carb modifications, because I pull mine, and it ran even better. The problem here is that he didn't really give enough info to help diagnose the issue. He asked how to do that so I told him. I figure he was asking because he had a surging/hunting issue with it, although he may not have.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]