Re: H pressure plate

Posted by John London, Tx on April 10, 2007 at 14:08:12 from (4.90.52.53):

In Reply to: Re: H pressure plate posted by RustyFarmall on April 10, 2007 at 13:15:20:

Rusty, I removed the three inner bolts and put them on the outside with the other three that bolt to the face of the flywheel. I have tried the old disc in it and I have tried an older pressure plate. I'm beginning to think the machinist turned more off of the flange than he turned off of the face of the flywheel. Will have to try finding what the measurement from the flywheel face to the flange is to check the available clearance. Thanks for the response-John

Replies:

• Re: H pressure plate Janicholson 17:27:49 04/10/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]