Re: 3588mcv

Posted by the tractor vet on April 09, 2007 at 20:21:43 from (75.19.127.89):

In Reply to: 3588mcv posted by dwag on April 09, 2007 at 18:10:19:

Ya getting all the O/Rings put in place ?? as the gskt won't hold shutt . And also if ya are not using the correct O/Rings this will happen . Also need to know what the pressure reading are and do you have the test tool to do both at one time . I run two gauges on them . And did you by chance get the wrong pressure reg. spring. Been out on 6 service calls for blowen MCV gskt's. three were jobs that the local Case I H shop did a T/A but they don't go thru the MCV as there head Mech. says that ya don't need to and his T/A jobs don't last more then three years . The other ones were by a guy that is a know it all and every time he left out two O/Rings.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]