Farmall Hood Lettering

Posted by chad504 on March 30, 2007 at 05:23:09 from (208.252.131.50):

Finally got most of the leaks dried up on the 130. I"m slowly pulling sheet metal off and painting since I have not had a long enough dry spell in Indiana to blast and paint the cast parts. Anyway, one of the studs was separated from the "FARMALL" lettering on the hood. Not sure how it was originally attached, but I want to get it back together, the original lettering is nice and straight and I want to reuse it. Any ideas how I can re-attach the mounting stud to the lettering?

Replies:

• Re: Farmall Hood Lettering randy hall 17:14:28 03/30/07 (0)
• Re: Farmall Hood Lettering El Toro 07:51:02 03/30/07 (0)
• Re: Farmall Hood Lettering STRAHL 05:51:25 03/30/07 (0)
• Re: Farmall Hood Lettering GordoSD 05:48:51 03/30/07 (0)
• Re: Farmall Hood Lettering Peabody 05:47:12 03/30/07 (0)
• Re: Farmall Hood Lettering Nat 2 05:44:22 03/30/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]