Re: 706 MCV seal

Posted by 510plows on March 27, 2007 at 10:56:42 from (134.29.140.240):

In Reply to: 706 MCV seal posted by hockemfaster on March 26, 2007 at 19:20:32:

There is an o-ring inside the nut that you will need to unscrew when you pull the valve out of the MCV valve. Make sure that the spool valve is not scored, pitted where the o-ring must seal. Not the best place for a valve with the battery sitting just inches away. After you install a new o-ring you should check and make sure that the linkage for the selector spool is adjusted correcly. Good luck

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]