Re: Bleeding hydraulics on an IH 350

Posted by Hugh MacKay on March 17, 2007 at 02:58:11 from (216.208.58.103):

In Reply to: Re: Bleeding hydraulics on an IH 350 posted by Don Benson on March 13, 2007 at 16:39:07:

Don: I beg to differ with you on the opinion that 350U and 350F hydraulics are totally different. While they are physically different, and placed in a different location on tractor, both tractors have the same hydraulic components. Both have the same standard or optional pump, both had too small of reservoir, both had a relief valve, both used that screen and both were equiped for 3 factory double action control valves, and one could be equipped with draft control. In both cases the actual control valves were identical and could be changed to single action.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]