Re: Seized farmall M

Posted by Burton on March 16, 2007 at 20:06:21 from (64.12.116.71):

In Reply to: Seized farmall M posted by sonny IH on March 16, 2007 at 17:33:19:

Had 560D that did"nt run for ten years. took the haed of and kept dumping wd40 in the sleeves and done this for three says and took an inch peace of brass stock and disconnected the rods from the crank and turned the crank oposite of the way of the piston that yur working on and hit the peice of stock with a hammer and got the piston to move downward enough to houn the sleeve a little then beat the piston back upward through the top of the engine and that worked slicker thana gut.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]