Re: Bleeding hydraulics on an IH 350

Posted by Ed Topel on March 12, 2007 at 20:46:23 from (152.163.100.199):

In Reply to: Re: Bleeding hydraulics on an IH 350 posted by Jrry on March 12, 2007 at 12:53:17:

The loader looks a lot like the Conematic-Pippen (sp?) loader on my Dads 240u. It also has a backhoe. The pump is mounted in the front on the loader frame and shaft driven off the crankshaft pulley. The hydraulic resevoir is in the loader frame on the right side ( the big triangle shaped box that the loader arm is attached to at the top). On our 240 the diverter valve switches flow between the loader and the backhoe. Hope this helps. Ed

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]