Re: International 434 , 1970

Posted by Fromjb2 on March 11, 2007 at 19:48:24 from (74.101.67.211):

In Reply to: Re: International 434 , 1970 posted by Jacques Leblanc on March 11, 2007 at 19:26:35:

Hi Jacques, we had an IH 1501 loader on our 434 and later traded for a 384, same tractor with different skins and an IH 1550 loader. The loader return was plumbed into the filler plug with a "T" pipe and the plug was on the top of the "T". If I remember correctly full is an inch or so below the filler hole. It can make a difference if the loader is fully raised especially if it has single acting cylinders on the boom.

JimB.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]