Re: freeze plugs in shift tower

Posted by Ted in NE on March 11, 2007 at 19:04:43 from (65.39.111.143):

In Reply to: freeze plugs in shift tower posted by JOE-ILLINOIS on March 11, 2007 at 17:48:31:

Usually on a tractor of that age you will find the holes in the tower are worn. This allows the pin to move and push the soft plugs out. Also between the wear on the end of the shift lever & extra movement up down from worn pin & holes,gets in 2 gears. Take a 7/16"x 3" hex head bolt. Taper the head of the bolt and one edge of the nut. Will center in the outside of hole , and tighten everything up.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]