Re: 12v kit for 340?

Posted by Nawlens Gator on March 08, 2007 at 14:08:38 from (52.128.30.17):

In Reply to: 12v kit for 340? posted by MN Mike on March 08, 2007 at 06:19:13:

I changed one of my 140's over with a 10 SI. Turned it upside down and mounted the short Alternator mount to the front of the tractor's front generator mount (had to drill out from 1/4" to 3/8"). Used a 2 1/2" long 3/8" bolt. Pulley's lined right up. Had to make a special bracket to get the tighteneing brace to fit. Everything fit right in without modifying the shroud.

Use the 3 wire set up with diode. Works great. Puts out up to 63 amps at 14.5 volts. Also went to electronic ignition and high output coil, both bought from this site. I'm pleased.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]