Re: Farmall M bolster question

Posted by Bob M on March 06, 2007 at 19:12:21 from (69.205.124.61):

In Reply to: Farmall M bolster question posted by John S-B on March 06, 2007 at 18:50:03:

Here's my experience: I found bushing area on my Super H steering bolster shaft somewhat worn (but at least worn smooth) when I took it apart to replace worn bushings. Using trial and error I tried different shim thicknesses between the OD of the new bushing shell and it's bore until I found a thickness that eliminated radial play at the top of the shaft without binding.

The tractor now steers easily with no wobble.

Presuming the shaft is not worn too badly, polishing and then shimming should work on yours too.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]