Re: B414 remote hydraulics

Posted by Fromjb2 on February 24, 2007 at 08:45:54 from (74.101.67.211):

In Reply to: B414 remote hydraulics posted by Elbert Hammie on February 24, 2007 at 05:37:35:

Hi, there was an optional remote hydraulic outlet available from IH. It was an "L" shaped pipe with a hydraulic quick coupler on one end and a banjo fitting on the other. The banjo fitting was connected to one of the hydraulic plugs in front of the seat. The only problem was it was single acting cylinders and was controlled by the 3pt hitch raise/lower lever after turning one of the valves in front of the seat. Therefore could not use 3pt and remote together.

If you want double acting cylinders then you have to install external hydraulic control valves by connecting into the high pressure line from the hydraulic pump. The IH 1500 Series front end loaders that fit this tractor were connected in this manner.

JimB

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]