Re: Super MTA Question

Posted by MN Charlie on January 23, 2002 at 20:06:54 from (216.188.193.172):

In Reply to: Super MTA Question posted by Ben on January 23, 2002 at 15:25:19:

I have a SMTA that I'm in the process of restoring and it's serial number is 61125. The fender mounting holes in the axle housings are 1/2 X 13. Is it possible that somebody had broken off bolts and they drilled and tapped them out to 3/8 only. How close have you inspected the holes? It's maybe possible that they never were drill any bigger when the tractor was built. I have 7 Farmall rowcrop tractors and they all have 1/2 X 13 fender mounting holes including my three 1939 M & H's. Keep us posted as to what you find.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Super MTA Question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]