Re: PTO for Farmall H

Posted by Dave_Id on January 20, 2002 at 19:20:18 from (63.15.161.90):

In Reply to: PTO for Farmall H posted by Jeffrey on January 20, 2002 at 18:21:22:

I can't remember which, but it either comes out in the engage position, or the disengaged position. It has to be assembled the same way. while you have it apart, you may as well replace the seal. The early 40's H pto was a little diffent than the later models. I had to weld up the two drive teeth on mine. It had worn so bad.

Follow Ups:

• Re: Re: PTO for Farmall H Wayne Swenson 16:28:34 01/21/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: PTO for Farmall H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]