|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: need help identifying serial number
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim Becker on January 18, 2002 at 04:56:43 from (4.61.16.38):
In Reply to: Re: Re: Re: Re: need help identifying serial number posted by ScottyNY on January 18, 2002 at 03:54:14:
The heavy right wheel became a standard item on both models at the same time. But that doesn't mean that the documents Guy got the weights from were both issued at the same time. So it might be different between the two figures. That would explain about 140#. (The heavy wheel option for the B {both wheels} added 280#.) The left wheel was stamped steel on the IA. Note the weights Guy has for the Super A and International Super A. The F Super A considerably outweights the F A but the I Super A is less than the I A. And it specificly says the I Super A weight includes the AI-23 mower. Since the I A specs imply a mower(width 69 inches with mower bar up), I assume one was included in the weight as well. Even then, it seems to heavy.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
