Re: Farmall M Shaft Seals

Posted by Dave_Id on January 14, 2002 at 08:24:14 from (63.27.107.221):

In Reply to: Farmall M Shaft Seals posted by lcbateman on January 14, 2002 at 08:16:04:

I have bought seals at Napa, Case IH dealership, and a place that speciallizes in bearings and seals. This place was usually alot cheaper than Napa. If you can get the number off the seal, it can be cross ref'd to any number of mfg'r. The seals you get today are about 3/8 thick, where the originals were a combination felt and rubber seal.. The thickness doesn't matter. If your shaft is worn, you can place the seal in an area with no wear.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall M Shaft Seals Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]