Re: 3-point hitch question

Posted by Fred Mills on January 13, 2002 at 13:34:23 from (216.93.88.69):

In Reply to: 3-point hitch question posted by Keith on January 13, 2002 at 07:53:37:

Keith, we had a three point hitch for our Super A back in the mid 50's. It was made by a supply company. Didn't work as well as an 8N beause of poor design: the top link receiver was bolted around the cross shaft on the rear lift. When the implement was raised, the receivered rotated. I think the relation between the lift arms and top link distance was wrong too. We did however use it for many years. Main problem was it didn't lift high enough. I'm sure there are good ones available now.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 3-point hitch question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]