Re: SMTA ta

Posted by Steven@nd on January 10, 2002 at 08:08:32 from (165.234.131.197):

In Reply to: SMTA ta posted by Dan on January 09, 2002 at 20:36:28:

As suggested, check the clutch mechanism first. There is an inspection plate on the top of the torque tube behind the bellhousing for the main clutch. Take that off and see what happens in there when you move the TA lever, you should see the clutch release and engage. If everything works OK in there then you need a rebuilt TA unit. I would install a rebuilt sprag type unit as the ramp and roller type can go bad again very quickly sometimes. Steelwheelranch.com has the unit for $395 exchange.

Steven

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: SMTA ta Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]