Farmall & IHC Tractors Discussion Board |
Re: 574 IH SERIAL # LOCATION AND CORRECT TIRE SIZE
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 73- 574 on January 07, 2002 at 16:35:07 from (130.74.184.124):
In Reply to: 574 IH SERIAL # LOCATION AND CORRECT TIRE SIZE posted by MARK on January 06, 2002 at 15:09:57:
Mine is on the left side of the transmission just as EG described. Does your's have a bar type axle or a flange type axle. There have been many of these imported as used tractors from Europe in the last 15 years. The european Ford's I have seen tend to have taller narrower tires with longer liftarms than those sold new in the U.S.. I have also seen many highway maintenance tractors that have been repainted and sold as Ag tractors. Many of these units were used to pull the folding wing type brush cutters and were often sold without the hitch linkage to keep the bid price down for the state and federal contracts. These tractors as well as the used imports are often made complete with salvaged parts and sold witout mention of their origin.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|